Response transforms from comparative study of commercial pulsed-neutron-capture logging systems

This paper reports that three generations of Schlumberger's Thermal Decay Time (TDTSM) logging devices - viz., TDT-K, TDT-M, and TDT-P - along with an Atlas Wireline PDK-100SM system were run in a Saudi Aramco well. The wellbore (8 1/2 in. with 7-in. casing) penetrated a sequence of clean sand, shaly sand, and shale streaks as exhibited by the openhole natural gamma ray log. The initial wellbore fluid was diesel. The fluid was then changed to brines of 42,000 and 176,000 ppm NaCl, respectively. Three repeat passes at a logging speed of 900 ft/hr were obtained by each device for each borehole liquid. As a result of this extensive comparative study, a set of departure curves and mathematical transforms was developed primarily for standardizing the various Schlumberger tools to a common reference logging system and/or borehole environment. The transforms were used beneficially to determine residual oil saturation (ROS) from time-lapse logs in a Saudi Aramco reservoir