Morphological Change and Number-Size Distributions of Particulate Matter (PM) from a Diesel Generator Operated with Wood Pyrolysis Oil-Butanol Blended Fuel

This report details our experimental study investigating particulate matter (PM) emissions from a diesel generator fueled with wood pyrolysis oil (WPO)–butanol blended fuel for electricity generation. Particle number-size distributions and PM mass concentrations from diesel, n-butanol, and WPO-butanol blended fuels were investigated via aerosol measurements using a fast mobility particle sizer and an aerosol monitor with three generator outputs (0, 3.3, and 6.6 kWe). For the n-butanol and WPO-blended fuels, the total number concentrations of exhaust particles were higher than that of conventional diesel combustion; however, the PM mass was observed to be nearly zero for all the engine operating conditions due to the higher number concentration in the nuclei mode. The morphology of the exhaust particles was investigated by analyzing transmission electron microscopy (TEM) micrographs. The morphology of the particles was drastically changed according to the test fuels and engine loads. Two types of particles were observed, including soot and coke shaped particles. These results were directly related to the immaturity of incipient soot particles due to the different physical properties and chemical compositions of the fuels.