Published June 2004 | Version v1
Journal article

LP compressor blade vibration characteristics at starting conditions of a 100 MW heavy-duty gas turbine

  • 1. Korea Institute of Machinery and Materials, Daejeon (Korea, Republic of)
  • 2. Leningradsky Metallichesky Zavod, Petersburg (Russian Federation)

Description

In this paper are presented the blade vibration characteristics at the starting conditions of the low pressure multistage axial compressor of heavy-duty 100 MW gas turbine. Vibration data have been collected through strain gauges during aerodynamic tests of the model compressor. The influences of operating modes at the starting conditions are investigated upon the compressor blade vibrations. The exciting mechanisms and features of blade vibrations are investigated at the surge, rotating stall, and buffeting flutter. The influences of operating modes upon blade dynamic stresses are investigated for the first and second stages. It is shown that a high dynamic stress peak of 120 MPa can occur in the first stage blades due to resonances with stall cell excitations or with inlet strut wake excitations at the stalled conditions

Additional details

Publishing Information

Journal Title
KSME International Journal
Journal Volume
18
Journal Issue
6
Series
7 refs, 10 figs, 1 tab
Journal Page Range
p. 895-903
ISSN
1226-4865

INIS

Country of Publication
Korea, Republic of
Country of Input or Organization
Korea, Republic of
INIS RN
36112259
Subject category
S42: ENGINEERING;
Descriptors DEI
COMPRESSOR BLADES; FAILURES; FATIGUE; GAS TURBINES; MECHANICAL VIBRATIONS; OSCILLATIONS; STRAIN GAGES; SURGES
Descriptors DEC
EQUIPMENT; MACHINERY; MEASURING INSTRUMENTS; MECHANICAL PROPERTIES; TURBINES; TURBOMACHINERY