ZZ ORIGEN2.2-UPJ, A complete package of ORIGEN2 libraries based on JENDL-3.2 and JENDL-3.3

1 - Description: ORLIBJ32 is a package of the libraries for ORIGEN2 code based on JENDL-3.2(NEA-1642). The one grouped cross section data for PWR and BWR were compiled using the burnup calculation results by SWAT code. The FBR libraries were compiled by the analysis system used at JNC for FBR core calculation. The fission yield and decay constants data were also updated using the second version of the JNDC FP library. In ORLIBJ32, not only one-grouped cross section data but also variable actinide cross section data are prepared, using a code written in FORTRAN77. The routines should be linked to the Original ORIGEN2.1 program. The LWR Libraries are prepared based on the current PWR fuel assembly specification, and the FBR libraries are based on the request by the Japanese FBR researchers. Before compiling the libraries, the specification of fuel assembly was completely reviewed and evaluated by the members of Working Group in the Japanese Nuclear Data Committee, 'working group on the evaluation of the amount of isotope generation'. ORLIBJ33 is a new libraries based on JENDL-3.3 following the release of JENDL-3.3. The parameters used to prepare the library are the same as those of ORLIBJ32. The Original version or ORLIBJ33 is coupled with ORIGEN2.1. But after the release of ORIGEN2.2 from ORNL as CCC-0371 through RSICC, several requests for a combination with ORLIBJ33 and ORIGEN2.2 were received. During the development of ORLIBJ33, released as NEA-1642, authors found a problem in the library maker for FBR libraries, and consequently it was revised and tested in JNC-Oarai. This package 'ORIGEN2.2-UPJ' contains: - updated source code of ORIGEN2.2 of CCC-0371 to use ORLIBJ32 and ORLIBJ33, - all Original libraries in CCC-0371, - ORLIBJ32 in NEA-164/03 (but libraries for FBR are revised), - and ORLIBJ33. In this package, decay data based on the second version of the JNDC FP library and, photon and decay data libraries based on JENDL-3.3 are also included. NLB and NLIB number for FBR is commonly used in ORLIBJ32 and ORLIBJ33. The pre-processor definition should be changed their selection before compiling the program. 2 - Restrictions on the complexity of the problem: Same as Original cross section library in ORIGEN2/CCC-371