Published September 1986
| Version v1
Report
Beam test of the RFQ linac TALL
Creators
- 1. Univ. of Tokyo, Japan
Description
Field tuning and beam test of the RFQ linac TALL were done. The machine is designed to accelerate heavy ions with charge to mass ratio of 1 ∼ 1/7. The acceleration cavity is of four vane structure driven with a single loop coupler. The cavity is 58 cm in diameter and 730 cm in length. No vane coupling ring is used. A field uniformity was obtained within an error of +/- 2% azimuthally and +/- 5% longitudinally by use of side inductive and end capacitive tuners. The TE210 mode was tuned at 101.3 MHz, 0.9 MHz lower than that of the closest mode TE111. Beam test was done by using proton beams. Transmission exceeding 90% was obtained. Energy and its magnet as T = 825 keV and AT/T = 1.6% in FWHM. They agree with calculated values
Additional details
Publishing Information
- Imprint Title
- 1986 linear accelerator conference proceedings
- Journal Page Range
- p. 371-373.
- Report number
- SLAC--303
Conference
- Title
- Linear accelerator conference.
- Dates
- 2-6 Jun 1986.
- Place
- Stanford, CA (USA).
INIS
- Country of Publication
- United States
- Country of Input or Organization
- United States
- INIS RN
- 18085986
- Subject category
- S43: PARTICLE ACCELERATORS;
- Resource subtype / Literary indicator
- Conference
- Descriptors DEI
- ACCURACY; ALIGNMENT; BEAM DYNAMICS; HILACS; QUADRUPOLES; RF SYSTEMS; TESTING; TUNING
- Descriptors DEC
- ACCELERATORS; DYNAMICS; HEAVY ION ACCELERATORS; LINEAR ACCELERATORS; MECHANICS; MULTIPOLES