In situ measurements of the spectral emittance of coal ash deposits

The spectral emittance of deposits left by bituminous and sub-bituminous coals under oxidizing conditions have been measured in situ. Pulverized coal is injected into a down-fired entrained-flow reactor. Ash accumulates on a probe in the reactor effluent and radiation emitted by the ash layer is recorded using a Fourier transform infrared (FTIR) spectrometer. Values for the spectral emissive power emitted by the ash and the surface temperature of the ash are extracted from these data. These results are then used to calculate the spectral emittance of the deposit. The spectral emittances of ash deposits formed by burning Illinois no. 6 (bituminous) coal and Powder River Basin (sub-bituminous) coal were measured between 3000 and 500 wavenumbers. The spectral emittance of the deposit left by the bituminous coal has a constant value of approximately 0.46 between 3000 and 2400 wavenumbers. Between 2200 and 1200 wavenumbers, the spectral emittance of the deposit increases from approximately 0.47 to approximately 0.61. Between 1200 and 500 wavenumbers, the spectral emittance is relatively constant at 0.61. The spectral emittance of the deposit left by the sub-bituminous coal is also relatively constant between 3000 and 2400 wavenumbers at a value of 0.29. Between 2200 and 500 wavenumbers, the spectral emittance of deposits from the sub-bituminous coal increases from approximately 0.29 to 0.55. Differences between these spectral emittance measurements and those measured ex situ illustrate the importance of making in situ measurements. Band emittances were calculated using the measured spectral emittances, and band emittances of the deposits are reported as functions of temperature.