Using a mass balance to understand the geology and geochemistry of a reservoir receiving and discharging acid mine drainage

Howard-Williams Lake is a 14.5 acre reservoir located in an abandoned coal mine in Perry County, Ohio. With a pH of 3.0 and acidity values of 300--400 mg/L, the reservoir has no plants or fish currently surviving in the lake. Reclamation of spoil piles adjacent to the lake to the north in the late 1980s was not successful in reducing the acidity of the lake. Currently, papermill sludge is being used on the reclaimed area to the north to promote vegetation, but the reservoir has shown no signs of improving. The goal of this project is to transform the lake into a fishable and swimmable one. The reservoir is receiving about 175 gallons per minute of acid mine drainage, not including seepage into the lake, from eight different sources. Three of the sources account for about 165 gallons per minute of the surface water that enters the lake. These inflows have relatively low acidity readings, which range from 66 mg/L to 568 mg/L. The other five sources of acid mine drainage have much lower flowrates, but have acidity values as high as 3,000 mg/L. Samples of all of the surface inflows and the outflow of the lake were taken and sent to a laboratory and tested for the following parameters: total acidity as CaCO3, total alkalinity as CaCO2, specific conductivity, total suspended solids, sulfate, chloride calcium, magnesium, sodium, potassium, total iron, total manganese, aluminum, and hardness. During sampling of the surface inflows, volumetric flowrates were measured for each inflow. Once the flowrates and the concentrations of the various parameters were known, a mass balance could be constructed which would show how much of each parameter was entering the lake each day. These data were then used to gain an understanding of the geochemistry and geology of the site