Decision threshold associated with multiple measurements. Application to the synthesis of the environment monitoring results

When the sample activity is measured for various reasons several times, then with each measurement can be associated an individual decision threshold and limit of detection. Each measurement can be analyzed through its own decision threshold. The whole measurements can sometimes present contradictory results, some measurements being lower than the decision threshold and other higher. The problem then arises to build a decision threshold and a detection limit taking into account all the individual results, and to decide if the radioactivity is finally detected or not. It is interesting to note that it is possible sometimes that the decision threshold taking account all results makes it possible to decide that the radioactivity is present whereas the totality of the individual results are negative in terms of individual decision threshold. The purpose of this article is to show how these thresholds and these coherent limits cumulated can be determined in way according to the experimental conditions. In a general way a rigorous method of cumulating makes it possible to systematically decrease the decision threshold and limit of detection in terms of activity. This approach has interesting applications in gamma spectrometry with multi-emitters, discharge or periodical environmental measurements. On the basis of measurements realized by the IRSN within the framework of the national monitoring of the environment, we will see the potential impact of these methods on the final assessments. (authors)