Post irradiation examination and analysis of 13(U,Pu) C-fuel pins irradiated in the thermal flux of FR 2

The post-irradiation examination of the pins at Karlsruhe Hot Cells revealed the following results: Nearly all specimens showed noteworthy clad deformations (up to 3%). Defects in the form of cracks in the clad were found at three pins. The observed clad deformations resulted from mechanical interaction between fuel and cladding in consequence of an inexorable fuel swelling. A linear relationship between burnup and clad deformation was found. Defects were observed for burnups greater than 50 MWd/kgM and can be explained by the small fabrications clearances between clad and fuel pellets (50-90 μm) and high smear densities. Fission gas measurements were performed in a three fold way, gas release, gas trapped in pores and gas in solid solution in the lattice of the mixed carbide were determined. The gas release fraction showed values between 10 and 15%. Whereas the fission gas content trapped in large pores (> 1 μm) was linearly dependent on burnup, fission gas in small pores and in solid solution reached a saturation value at about 20 MWd/kgM. Measurements of micro-hardness revealed carburization depths of the clad of up to 40% at temperatures of about 6500C. Furtermore, it could be confirmed that the carburization depth followed an Arrhenius law. (orig.)