Published 1987
| Version v1
Book
Water flow calorimetry measurements of heat loads for a volume production H- source
Creators
- 1. Lawrence Berkeley Lab., Univ. of California, Berkeley, CA (USA)
Description
The design of volume-production H- sources requires the knowledge of heat loads on the source components. The arc and filament heater power input to a 20 cm diameter x 23 cm long source can be 50 kW or higher, practically all of which is absorbed in the cooling water. Water flow calorimetry measurements were made to determine the heat loads on the bucket walls, grid no. 1, and magnetic filter rods. The measurements are presented for two different filament locations, for three different values of arc power, and for three values of source gas pressure
Additional details
Publishing Information
- Publisher
- IEEE Service Center.
- Imprint Place
- Piscataway, NJ (USA)
- Imprint Title
- Proceedings of the 12th symposium on fusion engineering
- Imprint Pagination
- vp.
- Journal Page Range
- p. 481-483.
Conference
- Title
- 12. symposium on fusion engineering.
- Dates
- 12-16 Oct 1987.
- Place
- Monterey, CA (USA).
INIS
- Country of Publication
- United States
- Country of Input or Organization
- United States
- INIS RN
- 21036629
- Subject category
- S43: PARTICLE ACCELERATORS;
- Resource subtype / Literary indicator
- Conference
- Descriptors DEI
- ACCELERATORS; CALORIMETRY; HEATERS; HYDROGEN IONS; ION SOURCES; SPECIFICATIONS; TEMPERATURE MEASUREMENT; THERMODYNAMICS
- Descriptors DEC
- CHARGED PARTICLES; IONS
Optional Information
- Secondary number(s)
- CONF-871007--.