AC field measurements of Fermilab Booster correctors using a rotating coil system

The first prototype of a new corrector package for the Fermilab Booster Synchrotron is presently in production. This water-cooled package includes normal and skew dipole, quadrupole and sextupole elements to control orbit, tune and chromaticity of the beam over the full range of Booster energies (0.4-8 GeV). These correctors operate at the 15 Hz excitation cycle of the main synchrotron magnets, but must also make more rapid excursions, in some cases even switching polarity in approximately 1 ms at transition crossing. To measure the dynamic field changes during operation, a new method based on a relatively slow rotating coil system is proposed. The method pieces together the measured voltages from successive current cycles to reconstruct the field harmonics. This paper describes the method and presents initial field quality measurements from a Tevatron corrector