Remote handling dynamical modelling: assessment on new approach to enhance positioning accuracy with heavy load manipulation

In vessel maintenance work in Fusion Tokamak will be carried out with help several sets of robotic devices. Heavy loads handling in constrained space is identified by all players of the RH community as a key-issue in the latest Fusion Tokamak facilities. To deal with high-level dexterity tasks, high payload to mass ratio and limited operating space, RH equipment designers can only propose systems whose mechanical flexibility is no longer negligible and need to be taken into account in the control scheme. Traditional approaches where control system only includes a linear model of deformation of the structure leads to poor positioning accuracy. Uncontrolled or under evaluated errors could be damaging for in-vessel components during maintenance operations in the Tokamak facility. To address the control of complex flexible systems, we will investigate the use of specific mechanical software that combines both finite element and kinematical joints analyses, with a strong-coupled formulation, to perform system dynamics simulations. This procedure will be applied on a single axis mock up robotic joint with highly flexible structure. A comparison of experimental results with the traditional linear approach and the specified software model will be carried out. Benefits introduced by this new approach will finally be assessed in view of RH design or specification in the field of RH in Fusion Tokamak scale such as ITER. (orig.)