Published 2002 | Version v1
Miscellaneous Metadata-only

Software of temperatures and flow acquisition in the RP-10 reactor

Creators

  • 1. Instituto Peruano de Energia Nuclear, Lima (Peru). Departamento de Calculo, Analisis y Seguridad
  • 2. Instituto Peruano de Energia Nuclear, Lima (Peru). Departamento de Mantenimiento

Description

The SAT software was developed due to the need for reliable measurements of temperature, pressure and flow for the thermal potential calibration of the RP-10. Using a PCI-MIO-16XE-10 board from National Instruments, signals are taken in pre-defined times by the user, and an operation report is automatically generated at the end of the acquisition. The objective of this work is based on showing the main characteristics of the software developed for this purpose

Part of:
1998-2001 Scientific Technological Report

Additional details

Additional titles

Original title (Spanish)
Software de adquisicion de temperaturas y caudal en el reactor RP-10

Publishing Information

Imprint Place
Lima (Peru)
Imprint Title
1998-2001 Scientific Technological Report
Imprint Pagination
512 p.
Journal Page Range
p. 138-140
ISSN
1684-1662
Report number
INIS-PE--039

INIS

Country of Publication
Peru
Country of Input or Organization
Peru
INIS RN
34083325
Subject category
S22: GENERAL STUDIES OF NUCLEAR REACTORS;
Descriptors DEI
CALIBRATION; CALIBRATION STANDARDS; COMPUTER CODES; ELECTRONIC CIRCUITS; ELECTRONIC EQUIPMENT; FLUID FLOW; NUCLEAR INSTRUMENT MODULES; PRESSURE MEASUREMENT; PROGRAMMING; RP-10 REACTOR; TEMPERATURE MEASUREMENT
Descriptors DEC
EQUIPMENT; POOL TYPE REACTORS; REACTORS; RESEARCH AND TEST REACTORS; RESEARCH REACTORS; STANDARDS; WATER COOLED REACTORS; WATER MODERATED REACTORS

Optional Information

Notes
Imprint:Informe Cientifico Tecnologico 1998-2001