Static strain ageing behaviour of dual phase steels
Creators
- 1. Zonguldak Karaelmas University, Karabuek Technical Education Faculty, Department of Materials, 78200 Karabuek (Turkey)
Description
In this work an investigation was conducted into the cold deformation ageing susceptibility of a carbon steel and a microalloyed steel, both with dual phase micro-structure. Ageing experiments after different prestrains were carried out at temperatures ranging from 25 to 250 deg. C. It was found that yield strength (YS) and tensile strength (UTS) of the steels with different dual phase micro-structures exhibit maximum values at ageing temperature of 100 deg. C after different prestrains. It is assumed that the first rise is based on the formation of solute atom atmospheres around dislocations and the further strengthening in the second step is caused by the low-temperature carbide precipitation in ferrite. When the ageing temperature increased to 150, 200 or 250 deg. C, YS decreased due to tempering effect in martensite. It was also found that the ageing of the microalloyed steel occurred more slowly than that of the carbon steel. The slow occurrence of ageing was clearly observed at temperatures of 100, 150, 200 and 250 deg. C and was attributed to the chemical composition of the steels
Availability note (English)
Available from http://dx.doi.org/10.1016/j.msea.2007.08.056Additional details
Identifiers
- DOI
- 10.1016/j.msea.2007.08.056;
- PII
- S0921-5093(07)01588-2;
Publishing Information
- Journal Title
- Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing
- Journal Volume
- 486
- Journal Issue
- 1-2
- Journal Page Range
- p. 63-71
- ISSN
- 0921-5093
- CODEN
- MSAPE3
INIS
- Country of Publication
- Netherlands
- Country of Input or Organization
- International Atomic Energy Agency (IAEA)
- INIS RN
- 40025580
- Subject category
- S36: MATERIALS SCIENCE;
- Descriptors DEI
- CARBIDES; CARBON STEELS; CHEMICAL COMPOSITION; DISLOCATIONS; FERRITE; LOW ALLOY STEELS; MARTENSITE; MICROSTRUCTURE; PRECIPITATION; STRAIN AGING; TEMPERATURE RANGE 0273-0400 K; TEMPERATURE RANGE 0400-1000 K; TEMPERING; TENSILE PROPERTIES; YIELD STRENGTH
- Descriptors DEC
- AGING; ALLOYS; CARBON ADDITIONS; CARBON COMPOUNDS; CRYSTAL DEFECTS; CRYSTAL STRUCTURE; HEAT TREATMENTS; IRON ALLOYS; IRON BASE ALLOYS; LINE DEFECTS; MECHANICAL PROPERTIES; SEPARATION PROCESSES; STEELS; TEMPERATURE RANGE; TRANSITION ELEMENT ALLOYS
Optional Information
- Copyright
- Copyright (c) 2007 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.