Published May 2019
| Version v1
Journal article
Development of high-power S-band load
Creators
- 1. Key Laboratory of Particle and Radiation Imaging, Tsinghua University, Ministry of Education, Beijing CN-100084 (China)
- 2. Department of Engineering Physics, Tsinghua University, Beijing CN-100084 (China)
- 3. Nuctech Company Limited, Beijing CN-100084 (China)
Description
Many prototypes of all stainless steel high-power loads have been developed in Tsinghua University to meet the needs of high-power test systems for different microwave bands. The loads, which work at the S-band with a center frequency of 2856 MHz, are based on a waveguide structure with regular grooves. These loads are tested at 290 MW peak power successfully. This study presents the design, simulation, fabrication, high-power test results and analysis of multipactor phenomenon.
Additional details
Identifiers
- DOI
- 10.1016/j.nima.2019.02.002;
- PII
- S016890021930172X;
Publishing Information
- Journal Title
- Nuclear Instruments and Methods in Physics Research. Section A, Accelerators, Spectrometers, Detectors and Associated Equipment
- Journal Volume
- 927
- Journal Page Range
- p. 209-213
- ISSN
- 0168-9002
- CODEN
- NIMAER
INIS
- Country of Publication
- Netherlands
- Country of Input or Organization
- International Atomic Energy Agency (IAEA)
- INIS RN
- 55016242
- Subject category
- S46: INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND TECHNOLOGY;
- Descriptors DEI
- COMPUTERIZED SIMULATION; DESIGN; FABRICATION; MHZ RANGE; MICROWAVE RADIATION; PEAK LOAD; STAINLESS STEELS; WAVEGUIDES
- Descriptors DEC
- ALLOYS; CARBON ADDITIONS; ELECTROMAGNETIC RADIATION; FREQUENCY RANGE; HIGH ALLOY STEELS; IRON ALLOYS; IRON BASE ALLOYS; RADIATIONS; SIMULATION; STEELS; TRANSITION ELEMENT ALLOYS
Optional Information
- Copyright
- Copyright (c) 2019 Elsevier B.V. All rights reserved.