Published October 1998 | Version v1
Journal article Metadata-only

Effect of pressing and Li doping on superconducting properties of Ag-sheathed Bi-2223 tapes

Creators

  • 1. Graduate School of Engineering, Yamagata University, Yonezawa (Japan)
  • 2. Centre for Superconducting and Electronic Materials, University of Wollongong, Northfields Avenue, Wollongong, NSW (Australia)
  • 3. Institute for Materials Research, Tohoku University, Katahira, Sendai (Japan)

Description

For Bi-2223 Ag-sheathed tapes, pressing conditions between sintering were optimized. It was found that with an increase in the pressure from 1 t cm-2 to 10 t cm-2, Ic of the tape was increased. To elucidate whether Li doping increases the Ic of the tape as reported in the bulk sample, Li doping was carried out. It was found that doping of 0.1-0.3 at.% Li increased Ic by 10%, which is consistent with the bulk data. As a result of Ic-B measurement at a temperature of 4.2 K, it was found that Ic/Ic(0 T) of the 0.3 at.% Li-doped tape under a magnetic flux density of 10 T was 20% higher than that of the non-doped tapes. (author)

Availability note (English)

Available online at the Web site for the journal Superconductor Science and Technology (ISSN 1361-6668) http://www.iop/org/

Additional details

Identifiers

URL
http://www.iop/org/;

Publishing Information

Journal Title
Superconductor Science and Technology
Journal Volume
11
Journal Issue
10
Journal Page Range
p. 1061-1064
ISSN
0953-2048

Conference

Title
Symposium on processing and critical current of high-temperature superconductors
Dates
2-4 Feb 1998
Place
Wagga Wagga (Australia)

INIS

Country of Publication
United Kingdom
Country of Input or Organization
Uzbekistan
INIS RN
31059261
Subject category
S36: MATERIALS SCIENCE; S75: CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND SUPERFLUIDITY;
Resource subtype / Literary indicator
Conference
Descriptors DEI
BISMUTH COMPOUNDS; CALCIUM COMPOUNDS; CRITICAL CURRENT; CUPRATES; HIGH-TC SUPERCONDUCTORS; LITHIUM ADDITIONS; MAGNETIC FLUX; PRESSING; SINTERING; STRONTIUM COMPOUNDS
Descriptors DEC
ALKALINE EARTH METAL COMPOUNDS; ALLOYS; COPPER COMPOUNDS; CURRENTS; ELECTRIC CURRENTS; FABRICATION; LITHIUM ALLOYS; MATERIALS WORKING; OXYGEN COMPOUNDS; SUPERCONDUCTORS; TRANSITION ELEMENT COMPOUNDS; TYPE-II SUPERCONDUCTORS