H, HM, and THM-C processes in engineered barriers

This session gathers 24 articles (posters) dealing with: determining water permeability of a compacted bentonite sand mixture under confined and free-swell conditions; the model prediction of engineered barrier system effectiveness in the fracture at laboratory scale; the changes in the hydraulic properties of a smectite in presence of chromium; the wall friction and ejection behaviour of bentonite-base buffer material; the thermo-hydro-mechanical behaviour of a large scale mock-up test 'Ophelie' in Belgium: laboratory characterization and numerical modelling; modeling swelling characteristics and permeability of several compacted bentonite affected by saline water; modelling for the long-term Mechanical and Hydraulic behaviour of bentonite-based materials considering chemical transitions; the coupled thermal-hydro analysis on partially saturated bentonite; the behaviour of a bentonite barrier in the laboratory: experimental results up to 8 years and numerical simulation; a coupled hydrogeochemical calculations of the interactions of corrosion products and bentonite; the freezing in saturated bentonite: a thermodynamic approach; the mechanical modeling of MX-80: Development of constitutive laws; the mechanical modeling of MX-80 - Quick tools for BBM parameter analysis; TBT3 Mock-up test-experimental and model results; the suction characteristics of two compacted bentonite; the retention curves and volume change properties of unsaturated MX-80 bentonite: a laboratory study; humidity induced swelling and water absorption rate of highly compacted bentonite; unconfined compression tests on bentonite samples exposed to high temperature during long time in the field test lot; the thermophysical properties of bentonite; the geochemistry and mineralogy of a bentonite subjected to heating and hydration in an in-situ test after five years operation; the LOT project, long term test of buffer material at Aespoe: a Moessbauer spectroscopic study; the self-sealing properties of buffer material under saline condition; a study on extrusion behaviour of buffer material into fractures using X-ray Ct method; and the ESDRED Project, module 1: selection and THM characterisation of the buffer material