Benchmarking of the FENDL-3 Neutron Cross-Section Data Library for Fusion Applications

This report summarizes the benchmark analyses performed in a joint effort of ENEA (Italy), JAEA (Japan), KIT (Germany), and the University of Wisconsin (USA) with the objective to test and qualify the neutron induced general purpose FENDL-3.0 data library for fusion applications. The benchmark approach consisted of two major steps including the analysis of a simple ITER-like computational benchmark, and a series of analyses of benchmark experiments conducted previously at the 14 MeV neutron generator facilities at ENEA Frascati, Italy (FNG) and JAEA, Tokai-mura, Japan (FNS). The computational benchmark revealed a modest increase of the neutron flux levels in the deep penetration regions and a substantial increase of the gas production in steel components. The comparison to experimental results showed good agreement with no substantial differences between FENDL-3.0 and FENDL-2.1 for most of the responses analysed. There is a slight trend, however, for an increase of the fast neutron flux in the shielding experiment and a decrease in the breeder mock-up experiments. The photon flux spectra measured in the bulk shield and the tungsten experiments are significantly better reproduced with FENDL-3.0 data. In general, FENDL-3, as compared to FENDL-2.1, shows an improved performance for fusion neutronics applications. It is thus recommended to ITER to replace FENDL-2.1 as reference data library for neutronics calculation by FENDL-3.0. (author)