Published May 2021 | Version v1
Journal article

Impact of digestate addition on the biostabilization of undersized fraction from municipal solid waste

  • 1. Department of Bioprocesses Engineering, Energetics and Automatization, Faculty of Production and Power Engineering, University of Agriculture in Krakow, Balicka Street 116b, 30-149 Krakow (Poland)
  • 2. Department of Microbiology and Biomonitoring, Faculty of Agriculture and Economics, University of Agriculture in Krakow, Mickiewicz Ave 24/28, 30-059 Krakow (Poland)
  • 3. Department of Machinery Management, Ergonomics and Production Processes, Faculty of Production and Power Engineering, University of Agriculture in Krakow, Balicka Street 116b, 30-149 Krakow (Poland)

Description

Highlights: • 5% digestate addition to UFMSW enhances the intensive phase of biostabilization. • 7.5% or more digestate addition decreases the C/N ratio and inhibits the process. • 2.5 and 5% digestate addition decrease CO2 share in outlet gases after two days. • The higher the digestate share, the less pathogens in stabilized waste. • The 10% share of digestate in UFMSW resulted in the lack of the thermophilic phase. Biostabilization is a commonly applied method in mechanical-biological treatment (MBT) plants to process municipal solid waste. In many ways, e.g. by applying additives to waste, MBT plant operators strive to enhance the effectiveness of biostabilization, which leads to reducing the time and energy outlays necessary for the process, as well as to minimizing the amount of final stabilized waste directed to landfills. This paper deals with the impact of digestate waste from agricultural biogas plants used as additive to the biostabilization process of undersized fraction from municipal solid waste (UFMSW) on the intensive phase of the process and properties of stabilized waste. The aim of this study was to assess whether, and if so to what extent, the application of digestate waste affects the process. Five different input compositions were tested (without digestate and with the addition of digestate at: 2.5; 5; 7.5 and 10 wt%). Waste treatment time was 2 weeks. Changes in moisture content, organic matter (OM), respiration activity (AT4), bulk density, air-filled porosity, heavy metal content, pH, carbon to nitrogen ratio, as well as composition of process gases emitted were evaluated. Additionally, microorganisms (including pathogens) inhabiting the processed waste in the aspect of waste sanitation were analyzed. It was found that the addition of digestate at 2.5, 5 and 7.5 wt% extended the duration of the thermophilic phase and decreased the CO2 content in process gases. The addition of digestate at 2.5 wt% and 5 wt%, decreased also OM by approx. 25% of the initial value and AT4 by approx. 30%. It was also proved that the addition of digestate favors the limited sanitation of UFMSW. As a result of the research, it was found that the addition of digestate at 2.5 wt% and 5 wt% is sufficient to accelerate the aerobic biological degradation of UFMSW.

Availability note (English)

Available from http://dx.doi.org/10.1016/j.scitotenv.2021.145375

Additional details

Identifiers

DOI
10.1016/j.scitotenv.2021.145375;
PII
S0048969721004435;

Publishing Information

Journal Title
Science of the Total Environment
Journal Volume
770
Journal Page Range
vp.
ISSN
0048-9697
CODEN
STENDL

Optional Information

Copyright
Copyright (c) 2021 Elsevier B.V. All rights reserved.