Development of IRMA reagent and methodology for PSA

The PSA test is a solid phase two-site immunoassay. Rabbit anti PSA is coated or bound on surface of solid phase and monoclonal anti PSA labeled with 1-125. The PSA molecules present in the standard solution or serum are 'Sandwiched' between the two antibodies. After formation of coated antibody-antigen-labeled antibody complex, the unbound labeled antibody will removed by washing. The complex is measured by gamma counter. The concentration of analyte is proportional to the counts of test sample. In order to develop kits for IRMA PSA, it should be prepared three essential reagents Antibody coated solid phase, labeled antibody, standards and finally optimizing them to obtain an standard curve fit to measure specimen PSA in desired range of concentration. The type of solid phase and procedure(s) to coat or bind to antibody, is still main debatable subject in development and setting up RIA/IRMA kits. In our experiments, polystyrene beads, because of their easy to coat with antibody as well as easy to use, can be considered as a desired solid phase. Most antibodies are passively adsorbed to a plastic surface (e.g. Polystyrene, Propylene, and Polyvinyl chloride) from a diluted buffer. The antibody coated plastic surface, then acts as solid phase reagent. Poor efficiency and time required to reach equilibrium and also lack of reproducibility especially batch-to-batch variation between materials, are disadvantages in this simple coating procedure. Improvements can be made by coating second antibody on surface of beads, and reaction between second and primary antibodies. There is also possible to enhance more coating efficiency of beads by using Staphylococcus ureus-Protein A. Protein A is a major component of staphylococcus aureus cell wall which has an affinity for FC segment of immunoglobulin G (IgG) of some species, including human; rabbit; and mice. This property of Staphylococcal Protein A has made it a very useful tool in the purification of classes and subclasses of Igs'. Based on this background, work plans for preparation of coated beads, monoclonal antibody, standardization and assay procedure are formulated