Published 1990 | Version v1
Report Metadata-only

Structure and properties of the aluminium alloy SAW-1 after long-term reactor irradiation

Creators

  • 1. AN Ukrainskoj SSR, Kiev (Ukraine). Inst. Yadernykh Issledovanij

Description

Mechanical tensile test data of the ring-shaped specimens and results of the aluminium alloy SAW-1 structure investigation after reactor irradiation at the temperature of 40-600C and fast neutron fluence nearly 3.6x1026m-2 (E≥0.8 MeV) are presented. The irradiated material ultimate elongation is 2.5% at the room test temperature. Mg2Si-phase positive influence on the alloy irradiation resistance is showed. 9 refs.; 1 fig.; 2 tabs. (author)

Part of:
Radiation materials science. V. 8

Additional details

Additional titles

Original title (Russian)
Структура и свойства сплава SAV-1 после длительного реакторного облучения

Publishing Information

Imprint Title
Radiation materials science. V. 8
Imprint Pagination
232 p.
Journal Page Range
p. 112-117.
Report number
INIS-mf--13547

Conference

Title
International conference on radiation materials science.
Original Conference Title
Mezhdunarodnaya konferentsiya po radiatsionnomu materialovedeniyu
Dates
22-25 May 1990.
Place
Alushta (Ukraine).

INIS

Country of Publication
Ukraine
Country of Input or Organization
Ukraine
INIS RN
24052938
Subject category
S36: MATERIALS SCIENCE;
Resource subtype / Literary indicator
Conference
Descriptors DEI
ALUMINIUM BASE ALLOYS; MAGNESIUM ADDITIONS; NEUTRON FLUENCE; PHASE STUDIES; PHYSICAL RADIATION EFFECTS; PLASTICITY; REACTOR CHANNELS; SILICON ADDITIONS; TEMPERATURE DEPENDENCE; TEMPERATURE RANGE 0273-0400 K; TENSILE PROPERTIES
Descriptors DEC
ALLOYS; ALUMINIUM ALLOYS; MECHANICAL PROPERTIES; RADIATION EFFECTS; REACTOR COMPONENTS; TEMPERATURE RANGE

Optional Information

Notes
Imprint:Radiatsionnoe materialovedenie. Tom 8.