Published December 1, 2005 | Version v1
Journal article

Structure and composition of thermally annealed Mo- and W-based CVD metal oxide thin films

  • 1. Central Laboratory of Solar Energy and New Energy Sources of the Bulgarian Academy of Sciences, Blvd.'Tzarigradsko Chaussee' 72, 1784 Sofia (Bulgaria)
  • 2. Eotvos Lorand University, Faculty of Solid State Physics, Pazmany Peter setany 1, 1117 Budapest (Hungary)
  • 3. Institute of Solid State Physics of the Bulgarian Academy of Sciences, Blvd.'Tzarigradsko Chaussee' 72, 1784 Sofia (Bulgaria)

Description

Thin films of molybdenum, tungsten and mixed MoO3-WO3 oxides obtained by atmospheric pressure chemical vapor deposition (APCVD) are investigated by applying Raman and XRD measurements. All the films were prepared by identical technological parameters and were annealed at 400 deg. C. Analysis of the Raman and XRD spectra of the three types of films shows that molybdenum oxide films crystallize in orthorombic MoO3 with a small fraction of MoO2.89 sub-oxide, while the annealed tungsten oxide films are triclinic WO3 with less than 2% sub-oxide of W20O58. The Raman spectra of the mixed MoO3-WO3 films indicate crystalline phases of molybdenum and tungsten oxides in an amorphous framework. In addition, XRD results show that the structure of the mixed oxides follows the crystallization of WO3 and Mo atoms are suggested to be substitute of W in the WO3 lattice

Additional details

Identifiers

DOI
10.1016/j.tsf.2005.06.023;
PII
S0040-6090(05)00599-7;

Publishing Information

Journal Title
Thin Solid Films
Journal Volume
492
Journal Issue
1-2
Journal Page Range
p. 322-326
ISSN
0040-6090
CODEN
THSFAP

Optional Information

Copyright
Copyright (c) 2005 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.