Evaluation of orange peel-derived activated carbons for treatment of dye-contaminated wastewater tailings

Dyes are colored compounds which are visible even at trace concentrations. Due to their recalcitrance and esthetic persistence, certain methods are unable to effectively eliminate them. So far, adsorptive treatment using activated carbons (ACs) is one of the most successful methods. In this study, we have employed orange peel (OP) as a cost-effective alternative to the expensive coal- and coir-based precursors to synthesize ACs for cationic methylene blue (MB) and anionic methyl orange (MO) dye adsorption. The pre-carbonized OP was activated via H₂SO₄, NaOH, KOH, ZnCl₂, and H₃PO₄ to study the effects of activation reagents on dye removal efficiencies and mechanisms. Among several isotherm models employed to fit the adsorption data, the Langmuir and Sips models sufficiently estimated the maximum equilibrium uptakes close to the experimental values of 1012.10 ± 29.13, 339.82 ± 6.98, and 382.15 ± 8.62 mg/g, for ZnCl₂-AC (MO), ZnCl₂-AC (MB), and KOH-AC (MB), respectively. The adsorption mechanisms were suggested to involve electrostatic binding, pi–pi interactions, hydrogen bonding, and electron donor–acceptor reactions. Consequently, more than 99% removal efficiency was achieved from a laboratory organic wastewater sample bearing ~ 35 mg/L of MB. The results thus suggest that the synthesized ACs from agricultural waste have the tendencies to be applied to real dye wastewater treatment.