Control system for mapping contaminated areas

Some Member states reported to the IAEA an interest in developing a system to be applied in the control of a detector for mapping a surface and defining the distribution of the radioactive material over this area. One of the possible applications would be refurbishment of Rectilinear Scanners (the predecessor of Gamma Cameras) that are old machines but might be still useful for some countries. The IAEA supported this development and a control system for this type of application was designed. in cooperation with the Instituto de Engenharia Nuclear (IEN), Brazil. The system is based on a board developed by the Forschungszentrum Julich in Germany (also in cooperation with the IAEA) and which is based on a Xilinx FPGA SPARTAN XC25150. It contains an MCA (1024 channels based on a fast ADC with software controlled peek detection) and two stepper motor controllers. The human-machine interface developed using Lab View is able to control two stepper motors in order to map an area with a radiation detector. During the mapping the pulse height distributions are collected and an intensity graph for the scanned area is presented on a PC screen. The system was successfully tested using a commercial X-Y table and two commercial stepper motors drivers.. In the next step this system will be used in real applications in the IAEA Member States