Published January 2005 | Version v1
Journal article Metadata-only

Shape anisotropy of magnetic field generation during tensile fracture in steel

Creators

  • 1. Department of Mechanical Engineering, Birla Institute of Technology, D-II4, outer campus, Ranchi 835215 (India)

Description

Magnetic field generated by low carbon steel specimens during crack propagation and fracture has been discussed in this paper. Different specimen cross-section viz. cylindrical, square, rectangular, and thin sheet have been considered for the investigation. Magnetic field generated have been found to be strongly dependent on the degree of necking. Cylindrical specimens, which undergo large necking, show more magnetic fields generated than sheets/strips, which undergo less necking

Additional details

Identifiers

DOI
10.1016/j.jmmm.2004.07.017;
PII
S0304-8853(04)00768-1;

Publishing Information

Journal Title
Journal of Magnetism and Magnetic Materials
Journal Volume
285
Journal Issue
1-2
Journal Page Range
p. 71-78
ISSN
0304-8853
CODEN
JMMMDC

INIS

Country of Publication
Netherlands
Country of Input or Organization
International Atomic Energy Agency (IAEA)
INIS RN
36072896
Subject category
S36: MATERIALS SCIENCE;
Descriptors DEI
ANISOTROPY; CARBON STEELS; CRACK PROPAGATION; CYLINDRICAL CONFIGURATION; FRACTURES; MAGNETIC FIELDS
Descriptors DEC
ALLOYS; CARBON ADDITIONS; CONFIGURATION; FAILURES; IRON ALLOYS; IRON BASE ALLOYS; STEELS; TRANSITION ELEMENT ALLOYS

Optional Information

Copyright
Copyright (c) 2004 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.