Published 2000 | Version v1
Journal article

Of the structural features forming ceramics mechanical properties out of zirconium dioxide partially stabilized by Y3+ and Mg2+ ions

Creators

  • 1. Donetskij Fiziko-Tekhnicheskij Inst. im. A.A. Galkina NAN Ukrainy, Donetsk (Ukraine)

Description

Structural differences in ceramics based on Mg- and Y - partially stabilized zirconium dioxide (PSZO) and processes determining their physico-mechanical properties are described. It is shown that the Y-PSZO ceramics have a tendency towards intercrystalline fracture and their grain size varies from 0.2 to 0.8 μm, the Mg-PSZO ceramics are, as a rule, fractured according to trans-crystallite mechanism and their grain size is within 30-80 μm. High mechanical properties of the materials are provided by compressing stresses appearing as a result of β'-phase transformation into α-phase. In the Y-PSZO ceramics separate grains are transformed, while in the Mg-PSZO ceramics lenticular isolations of β'-phase on γ-phase are observed. The transformation is induced by tensile stress of crack elastic field, i.e. transformation strengthening occurs

Abstract (Russian)

Описаны структурные различия керамики Mg- и Y-частично стабилизированного диоксида циркония (ЧСДЦ) и процессов, определяющих их физико-механические свойства. Показано, что керамика Y-ЧСДЦ разрушается преимущественно интеркристаллитно и размер зерна колеблется от 0,2 до 0,8 мкм, керамика Mg-ЧСДЦ разрушается, как правило, транскристаллитно и размер зерна находится в пределах 30-80 мкм. Высокий уровень механических свойств этих материалов обеспечивается сжимающими напряжениями, возникающими при превращении β'-фазы в α-фазу. При этом в керамике Y-ЧСДЦ превращаются отдельные зерна, в керамике Mg-ЧСДЦ наблюдаются чечевицеобразные выделения β'-фазы, находящиеся в γ-фазе. Превращение индуцируется растягивающим напряжением упругого поля трещины, т.е. реализуется трансформационное упрочнение

Additional details

Additional titles

Original title (Russian)
О структурных особенностях, формирующих механические свойства керамики из частично стабилизированного ионами Ы

Publishing Information

Journal Title
Ogneupory i Tekhnicheskaya Keramika
Journal Issue
no.12
Journal Page Range
p. 15-17
ISSN
1028-0812

INIS

Optional Information

Notes
6 refs.; 3 figs.