Progress on the Los Alamos heavy-ion injector

Heavy-ion fusion using an induction linac requires injection of multiple high-current beams from a pulsed electrostatic accelerator at as high a voltage as practical. Los Alamos National Laboratory is developing a 16-beam, 2-MeV, pulsed electrostatic accelerator for Al+ ions. The ion source will use a pulsed metal vapor arc plasma. A biased grid wil control plasma flux into the ion extraction region. This source has achieved a normalized emittance of ε/sub n/<3x10-7π-m-rad with Al+ ions. An 800 kV Marx prototype with a laser fired diverter is being assembled. The ceramic accelerating column sections have been brazed and leak tested. Voltage hold off on a brazed sample was more than doubled by selective removal of the Ticusil braze fillet extending along the ceramic. A scaled test module held 250 kV for 50 μs, giving confidence that the full module can hold 175 kV per section. The pressure vessel should be received in June 1986. High-voltage testing of a 1 MV column will begin by early 1987