Published August 2005 | Version v1
Journal article

Measurement of erosion rate by absorption spectroscopy in a Hall thruster

  • 1. Department of Aeronautics and Astronautics, The University of Tokyo, Hongo 7-3-1, Bunkyo-ku, Tokyo 113-8656 (Japan)
  • 2. Department of Advanced Energy, The University of Tokyo, Kashiwanoha 5-1-5, Kashiwa, Chiba 277-8562 (Japan)
  • 3. Department of Advanced Energy Engineering Science, Kyushu University, 6-1 Kasuga-kouen, Kasuga, Fukuoka 816-8580 (Japan)

Description

The erosion rate of a Hall thruster was estimated with the objective of building a real-time erosion rate monitoring system using a 1 kW class anode layer type Hall thruster. This system aids the understanding of the tradeoff between lifetime and performance. To estimate the flux of the sputtered wall material, the number density of the sputtered iron was measured by laser absorption spectroscopy using an absorption line from ground atomic iron at 371.9935 nm. An ultravioletAlxInyGa(1-x-y)N diode laser was used as the probe. The estimated number density of iron was 1.1x1016 m-3, which is reasonable when compared with that measured by duration erosion tests. The relation between estimated erosion rate and magnetic flux density also agreed with that measured by duration erosion tests

Additional details

Identifiers

Publishing Information

Journal Title
Review of Scientific Instruments
Journal Volume
76
Journal Issue
8
Journal Page Range
p. 083111-083111.4
ISSN
0034-6748
CODEN
RSINAK

Optional Information

Notes
(c) 2005 American Institute of Physics