Published 2008
| Version v1
Journal article
Fatigue life prediction of ZE41A magnesium alloy using Weibull distribution
- 1. Department of Mechanical Engineering, Jayamatha Engineering College, Aralvaimozhi, Tamil Nadu (India)
- 2. Department of Manufacturing Engineering, Annamalai University, Chidambaram, Tamil Nadu (India)
- 3. Foundry and Forging Division, HAL, Bangalore, Karnataka (India)
Description
In this investigation, the fatigue life prediction of ZE41A magnesium alloy has been statistically analyzed by Weibull distribution. The mechanical fatigue tests are conducted under R = 0.1 axial tension condition on specimen machined at as cast and welded materials. The micro structural investigations performed shows strong influence of precipitation on the fatigue failure of material. The curve for maximum stress and cycles to failure has been constructed for above stated materials. Using Weibull, the probability distribution according to which the material will fail is obtained. The fracture surface of the specimens is studied using scanning electron microscope
Availability note (English)
Available from http://dx.doi.org/10.1016/j.matdes.2008.01.001Additional details
Identifiers
- DOI
- 10.1016/j.matdes.2008.01.001;
- PII
- S0261-3069(08)00002-2;
Publishing Information
- Journal Title
- Materials and Design
- Journal Volume
- 29
- Journal Issue
- 8
- Journal Page Range
- p. 1549-1553
- ISSN
- 0261-3069
- CODEN
- MADSD2
INIS
- Country of Publication
- United Kingdom
- Country of Input or Organization
- International Atomic Energy Agency (IAEA)
- INIS RN
- 40016526
- Subject category
- S36: MATERIALS SCIENCE;
- Descriptors DEI
- DISTRIBUTION; FATIGUE; FORECASTING; FRACTURES; GAS TUNGSTEN-ARC WELDING; MAGNESIUM ALLOYS; PRECIPITATION; PROBABILITY; SCANNING ELECTRON MICROSCOPY; STRESSES; SURFACES
- Descriptors DEC
- ALLOYS; ARC WELDING; ELECTRON MICROSCOPY; FABRICATION; FAILURES; GAS METAL-ARC WELDING; JOINING; MECHANICAL PROPERTIES; MICROSCOPY; SEPARATION PROCESSES; WELDING
Optional Information
- Copyright
- Copyright (c) 2008 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.