Dynamic soil-structure interaction analysis based on discretized Green function

In the seismic design of massive and rigid structure such as a nuclear reactor building, it is important to evaluate the dynamic interaction effect between soil and structure. The authors developed an advanced and practical method to evaluate the interaction effect between the soil which is considered to be semi-infinite elastic medium, and the structure in which flexibility is considered. In this report, this method is applied to a seismic analysis of the full size BWR Mark I type reactor building. For horizontal input earthquake, the vibrational degrees of freedom shall be considered both horizontal and vertical as the rocking response occurs because of the overturning moment caused by the building's horizontal response. The results of earthquake response analysis show that the floors deform in-place and the response acceleration at the center of the floor is larger than that of at the side wall. The response spectra also differ each other even if on the same floor because of the in-place deformation of the floor slab. It means that in analytical modeling of the reactor building, multi-stick model considering deformation of floor slab is required instead of single-stick model. The ratio of the peak acceleration response of the roof floor to the input earthquake is about 2.5. (orig./HP)