Extraction of Am(III) from different acid media by di-2-ethyl hexyl phosphoric acid containing phosphorous pentoxide

The extraction of Am(III) from nitric, hydrochloric, oxalic, phosphoric and hydrofluoric acids was studied using 0.4F di-2-ethyl hexyl phosphoric acid (HDEHP) containing 0.1M phosphorous pentoxide (P2O5) in dodecane/xylene. The extraction with pure 0.4F HDEHP was found to be negligible from all the media studied. However, the presence of a small amount of P2O5 in it increased the extraction substantially. The distribution ratios of Am(III) obtained for HDEHP - P2O5 mixture 3M nitric acid containing different concentrations of oxalic acid/phosphoric acid/hydrofluoric acid are in the order of 200-250. The same for 3M hydrochloric acid is very high (∼800). These distribution ratios are sufficiently high for the quantitative extraction of Am(III) from all the acid media studied. Different reagents such as ammonium oxalate, sodium oxalate, oxalic acid, hydrofluoric acid, sodium carbonate and potassium sulphate were explored for the back extraction of Am(III) from 0.4F HDEHP + 0.1M P2O5 in dodecane/xylene. Of these, 0.35M ammonium oxalate and 1M sodium carbonate were found to be most suitable. The back extraction of Am(III) was also attempted with water and 1M H2SO4, HNO3, HClO4 and HCl solutions after allowing the extracted organics to degrade on its own. It was found that more than 90% of Am could be back extracted with these acids. Using this method more than 90% of Am(III) was recovered from nitric acid solutions containing calcium and fluoride ions. (author)