Published 1991 | Version v1
Report Metadata-only

Development of RFQ accelerator for the MMF linac

Creators

  • 1. Inst. for Theoretical and Experimental Physics, Moscow (Russian Federation)
  • 2. Inst. for Nuclear Research, Moscow (Russian Federation)

Description

The 750 keV RFQ accelerator section is under development in order to install it upstream the first drift tube cavity of the MMF Linac instead of a 2-gap buncher. The using of RFQ allows to decrease accelerating tube voltage to 400 kV and to increase pulse duration two times without pulsed transformer saturation. Main features of RFQ allows to decrease accelerating tube voltage to 400 kV and to increase pulse duration two times without pulsed transformer saturation. Main features of RFQ section are discussed: sufficiently high capture efficiency (up to 67%); reasonable length of 1.3 m; beam bunching without longitudinal halo

Additional details

Publishing Information

Imprint Title
Conference record of the 1991 IEEE particle accelerator conference: Accelerator science and technology. Volume 5 of 5
Imprint Pagination
708 p.
Journal Page Range
p. 3109-3110.
Report number
DOE/ER/40607--1-Vol.5

Conference

Title
1991 Institute of Electrical and Electronics Engineers (IEEE) particle accelerator conference (PAC).
Dates
6-11 May 1991.
Place
San Francisco, CA (United States).

INIS

Country of Publication
United States
Country of Input or Organization
United States
INIS RN
24002075
Subject category
S43: PARTICLE ACCELERATORS;
Resource subtype / Literary indicator
Conference, Non-conventional Literature
Descriptors DEI
BEAM BUNCHERS; BEAM BUNCHING; BEAM CURRENTS; CAVITY RESONATORS; DESIGN; DRIFT TUBES; LINEAR ACCELERATORS; MESON FACTORIES; MODIFICATIONS; PARTICLE BOOSTERS; RF SYSTEMS
Descriptors DEC
ACCELERATORS; BEAM DYNAMICS; CURRENTS; DYNAMICS; ELECTRONIC EQUIPMENT; EQUIPMENT; MECHANICS; RESONATORS

Optional Information

Secondary number(s)
CONF-910505--Vol.5.