Published August 1, 2004 | Version v1
Journal article

The strong influence of displacement rate on void swelling in variants of Fe-16Cr-15Ni-3Mo austenitic stainless steel irradiated in BN-350 and BOR-60

Description

Recent irradiation experiments conducted on a variety of austenitic stainless steels have shown that void swelling appears to be increased when the dpa rate is decreased, primarily by a shortening of the transient regime of swelling. This paper presents results derived from nominally similar irradiations conducted on six Russian steels, all laboratory heat variants of Fe-16Cr-15Ni-3Mo-Nb-B, with each irradiated in two fast reactors, BOR-60 and BN-350. The BN-350 irradiation proceeded at a dpa rate three times higher than that conducted in BOR-60. In all six steels, a significantly higher swelling level was attained in BOR-60, agreeing with the results of earlier studies

Additional details

Identifiers

DOI
10.1016/j.jnucmat.2004.04.344;
PII
S0022311504002442;

Publishing Information

Journal Title
Journal of Nuclear Materials
Journal Volume
329-333
Journal Issue
1
Journal Page Range
p. 621-624
ISSN
0022-3115
CODEN
JNUMAM

Conference

Title
11. International conference on fusion reactor materials
Acronym
ICFRM-11
Dates
7-12 Dec 2003
Place
Kyoto (Japan)

Optional Information

Copyright
Copyright (c) 2004 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.