Published December 1, 1995 | Version v1
Journal article

Beam tests of the prototype level-1 trigger system and drift tubes with field-shapers proposed for the SDC barrel muon system

  • 1. Tohoku Univ., Sendai (Japan). Dept. of Physics
  • 2. Institute of Applied Physics, University of Tsukuba, Tsukuba 305 (Japan)
  • 3. Department of Applied Physics, Tohoku-Gakuin University, Tagajo 985 (Japan)
  • 4. KEK, National Laboratory for High Energy Physics, Tsukuba 305 (Japan)
  • 5. Hiroshima Institute of Technology, Hiroshima 731-51 (Japan)
  • 6. SSC Laboratory, 2550 Beckleymeade Ave., Dallas, TX 75237-3946 (United States)
  • 7. Department of Physics, Kyoto University, Kyoto 606 (Japan)
  • 8. Department of Physics, University of Washington, Seattle, WA 98195 (United States)
  • 9. Department of Electronic and Computer Engineering, Ibaraki College of Technology, Katsuta 312 (Japan)

Description

Mini-tower beam tests were carried out at a test beam line of KEK-PS in order to study the performance of the prototype level-1 trigger system and drift tubes with field-shapers originally designed for the SDC barrel muon detector at the SSC. A mini-tower of 10 layers, 31 drift tubes in total, and a prototype level-1 trigger module were designed and fabricated for the tests. The spatial resolution of about 230 μm was obtained for the tubes. Relatively high rates of multi-pulse signals were observed for most of the tubes. The trigger module designed at KEK using a logic delta-T method was studied for various trigger logics and its performance was found to be very satisfactory. (orig.)

Additional details

Publishing Information

Journal Title
Nuclear Instruments and Methods in Physics Research. Section A, Accelerators, Spectrometers, Detectors and Associated Equipment
Journal Volume
366
Journal Issue
2-3
Journal Page Range
p. 310-319.
ISSN
0168-9002
CODEN
NIMAER