A novel fabrication technique for thin metallic vacuum chambers with low eddy current losses

Eddy current problems in synchrotrons have been avoided until now by using costly and thick ceramic vacuum chambers which reduce the free magnet aperture. These disadvantages are eliminated by a novel fabrication technique developed for the chambers of the new 9 GeV electron synchrotron DESY II operating with 12.5 Hz repetion rate. The elliptical chambers 80x40 mm are made from .3 mm thick stainless steel tubes reinforced by thin ribs. The ribs are brazed on the tubes by a high temperature Ni-base brazing alloy. The linear eddy current losses are 60 W/m and increase the chamber temperature to only 500C. The available beam aperture is now 93% of the magnet gap. A still higher repetion rate up to 100 Hz can be achieved by reducing the wall thickness to .1 mm and using tubes made from a Ti-alloy having higher resistivity than stainless steel