Hot Laboratories and Remote Handling

The Opening talk of the workshop 'Hot Laboratories and Remote Handling' was given by Marin Ciocanescu with the communication 'Overview of R and D Program in Romanian Institute for Nuclear Research'. The works of the meeting were structured into three sections addressing the following items: Session 1. Hot cell facilities: Infrastructure, Refurbishment, Decommissioning; Session 2. Waste, transport, safety and remote handling issues; Session 3. Post-Irradiation examination techniques. In the frame of Section 1 the communication 'Overview of hot cell facilities in South Africa' by Wouter Klopper, Willie van Greunen et al, was presented. In the framework of the second session there were given the following four communications: 'The irradiated elements cell at PHENIX' by Laurent Breton et al., 'Development of remote equipment for DUPIC fuel fabrication at KAERI', by Jung Won Lee et al., 'Aspects of working with manipulators and small samples in an αβγ-box, by Robert Zubler et al., and 'The GIOCONDA experience of the Joint Research Centre Ispra: analysis of the experimental assemblies finalized to their safe recovery and dismantling', by Roberto Covini. Finally, in the framework of the third section the following five communications were presented: 'PIE of a CANDU fuel element irradiated for a load following test in the INR TRIGA reactor' by Marcel Parvan et al., 'Adaptation of the pole figure measurement to the irradiated items from zirconium alloys' by Yury Goncharenko et al., 'Fuel rod profilometry with a laser scan micrometer' by Daniel Kuster et al., 'Raman spectroscopy, a new facility at LECI laboratory to investigate neutron damage in irradiated materials' by Lionel Gosmain et al., and 'Analysis of complex nuclear materials with the PSI shielded analytical instruments' by Didier Gavillet. In addition, eleven more presentations were given as posters. Their titles were: 'Presentation of CETAMA activities (CEA analytic group)' by Alain Hanssens et al. 'Analysis of a metallic precipitates in an irradiated simulated fuel' by Jung Yang-Hong, 'Detritiation of tiles from tokamaks by laser cleaning' presented by J. Paul Coad et al., 'Experience feedback on the refurbishment of the LECA hot laboratory at Cadarache' by Jean-Paul Grandjean et al., 'New device for X-ray diffraction analyses of irradiated materials' by Christophe Valot et al., 'Tensile testings and metallographic examination on irradiated CANDU pressure tube specimens' by Silviu Ionescu et al., 'Separation and determination of actinides from spent nuclear fuel solution by alpha spectrometry' by Ana Matei et al., 'Experiments for separation and purification of 99Mo from uranium solutions with fission products as tracers' by Gabriela Androne et al., 'Iodine induced stress corrosion cracking and axial creep: 2 new cladding testing facilities at Leci laboratory' by Quentin Auzoux et al., 'Development of a gas trapping system for fission products xenon and krypton throughout dissolution of irradiated targets and fuels in hot cells' by Pierrick Menegon et al., and finally, 'Post-irradiation-examination of irradiated fuel outside the hot cell' by Dawn E. Janney