Effect of combined activation on the preparation of high porous active carbons from granulated post-consumer polyethyleneterephthalate

Activated carbons were prepared from granulated post-consumer PET by combined activation including heat treatment with sulphuric acid (chemical activation) followed by steam activation. The effect of activation time, temperature, impregnation coefficient in the activation process was studied in order to optimize those reception parameters. One of the most important parameter in combined activation of crushed PET was found to be impregnation coefficient. It was defined that the optimal impregnation coefficient is equal 28%. Activation temperature is another variability which has a significant effect on the pore volume evolution. The increasing of activation temperature enhances the surface area and pore volumes of active carbons. The yield of final product which composes of nearly 15% is the factor limited the activation temperature above 800 deg. C. Textural characteristics of the samples were carried out by performing N2 adsorption isotherm at -196 deg. C. The obtained active carbons were mainly micro- and mesoporous and with BET apparent surface areas of up to 1030 m2/g. The adsorption capacity on methylene blue reaches 1.0 mmol/g, the sorption activity on iodine comes to 77%