Published November 4, 2013 | Version v1
Journal article

Reliability of AlGaN/GaN high electron mobility transistors on low dislocation density bulk GaN substrate: Implications of surface step edges

  • 1. Center for Device Thermography and Reliability (CDTR), H.H. Wills Physics Laboratory, Tyndall Avenue, Bristol BS8 1TL (United Kingdom)
  • 2. Materials Science and Engineering Department, North Carolina State University, Raleigh, North Carolina 27695 (United States)
  • 3. Kyma Technologies, Inc., Raleigh, North Carolina 27617 (United States)
  • 4. Electrical and Computer Engineering Department, Virginia Commonwealth University, Richmond, Virginia 23284 (United States)
  • 5. Air Force Research Laboratory, Wright-Patterson Air Force Base, Dayton, Ohio 45433 (United States)

Description

To enable gaining insight into degradation mechanisms of AlGaN/GaN high electron mobility transistors, devices grown on a low-dislocation-density bulk-GaN substrate were studied. Gate leakage current and electroluminescence (EL) monitoring revealed a progressive appearance of EL spots during off-state stress which signify the generation of gate current leakage paths. Atomic force microscopy evidenced the formation of semiconductor surface pits at the failure location, which corresponds to the interaction region of the gate contact edge and the edges of surface steps

Additional details

Identifiers

Publishing Information

Journal Title
Applied Physics Letters
Journal Volume
103
Journal Issue
19
Journal Page Range
p. 193507-193507.4
ISSN
0003-6951
CODEN
APPLAB

Optional Information

Notes
(c) 2013 AIP Publishing LLC