The retention of radioactive noble gases in nuclear power stations by means of activated charcoal delay systems. A status report

Since the beginning of the 1970s off-gas systems using activated charcoal have been used in BWRs and PWRs to minimize the release of radioactive noble gases and the resultant exposure of the environment. In practice, the power-related noble gas emission rate achieved is 1-10 Ci/MWa in the case of BWRs and 0.1-1 Ci/MWa for PWRs. The systems are relatively simple in design and operators state that they are easy and cheap to run. The activated charcoal used shows no signs of becoming spent and, if protected from humidity, retains its full efficiency. On the basis of the information to hand it has never been necessary to replace it. Experience to date suggests that a charge of activated charcoal can last the life of the facility as a whole. All knowledge and experience gained so far indicate that off-gas systems using activated delay systems for BWR facilities are indispensable and must therefore be considered an integral part of such facilities. Capital expenditure amounts to approximately 1% of the total cost and should, therefore, not be unacceptable. In PWRs off-gas systems using pressure vessels as delay trains are in competition with off-gas systems based on activated charcoal delay systems. The activated charcoal systems have proved themselves and their use, which involves capital expenditure equivalent to approximately of 0.5% to the overall cost, can be recommended without reservation