Published August 2008 | Version v1
Journal article

Effect 239Pu in burnup measurement process in HTR-PM

  • 1. Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing (China)
  • 2. China Institute of Atomic Energy, Beijing (China)

Description

The portion of 239Pu in the nuclear fuel cycle of gas cooled high temperature reactor-pebble bed module (HTR-PM) is very important at the high level of burnup, which certainly influences the online burnup measurement. This problem was discussed in the paper.When the expected average burnup was 80000 (MW.d) /t (U), the calculation result showed that the energy release from 239Pu fission contributed to the burnup of fuel pebble by 26.7% and the activity of 137Cs and 134Cs from 239Pu fission is about 27.2% and 23.2%, respectively. Further analysis also showed that it is better to determinate the burnup by the activity of 137Cs in the pebble than by the activity ratio of 134Cs/137Cs. (authors)

Additional details

Publishing Information

Journal Title
Nuclear Power Engineering
Journal Volume
29
Journal Issue
4
Journal Page Range
p. 88-92
ISSN
0258-0926

Optional Information

Notes
5 figs., 2 tabs., 8 refs.