Published June 2, 2000
| Version v1
Journal article
Influence of cutting stress on magnetic field and flux density distribution in non-oriented electrical steels
Description
Magnetic properties of sheets of electrical steel with different permeability, grain size and silicon content were measured before and after cutting into strips. Cutting caused a reduction in permeability and the degraded area close to the cut edge. Silicon content was less influential than the grain size. The degraded area was found to be up to 15 mm depending on the type of material
Additional details
Identifiers
- PII
- S0304885300002596;
Publishing Information
- Journal Title
- Journal of Magnetism and Magnetic Materials
- Journal Volume
- 215-216
- Journal Issue
- 3
- Journal Page Range
- p. 687-689
- ISSN
- 0304-8853
- CODEN
- JMMMDC
INIS
- Country of Publication
- Netherlands
- Country of Input or Organization
- International Atomic Energy Agency (IAEA)
- INIS RN
- 34035104
- Subject category
- S36: MATERIALS SCIENCE;
- Descriptors DEI
- CUTTING; FLUX DENSITY; GRAIN SIZE; MAGNETIC FIELDS; MAGNETIC FLUX; MAGNETIC SUSCEPTIBILITY; SHEETS; SILICON COMPOUNDS; STEELS; STRESSES
- Descriptors DEC
- ALLOYS; CARBON ADDITIONS; IRON ALLOYS; IRON BASE ALLOYS; MACHINING; MAGNETIC PROPERTIES; MICROSTRUCTURE; PHYSICAL PROPERTIES; SIZE; TRANSITION ELEMENT ALLOYS
Optional Information
- Copyright
- Copyright (c) 2000 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.