Harvesting pulpwood and firewood using a tractor-mounted single-grip harvester

The TTS-Institute's Department of Forestry conducted a work study on the AM 240 felling-delimbing-cross-cutting -device. The timber was prepared into pulp- and fuelwood. The tops of the pulpwood stems and stems smaller than pulpwood were made into fuelwood. The base machine used was an agricultural tractor. The study is part of a research project titled Forest Owners' Energy-Wood Harvesting Technology. The combined productivity of preparing pulpwood and fuelwood varied between 2.8-4.1 m3 per effective hour. Thus, the productivity achieved was of the same order as that reported in an earlier TTS-Institute study on the devices AM 200 model. The outturns on the sample strips included a fair amount of crooked hardwood timber, which iced to reduced productivity. During the work study the felling device functioned reliably. (author) 3 refs