The main injector chromaticity correction sextupole magnets: Measurements and operating schemes

The Fermilab Main Injector (FMI) is a high intensity proton synchrotron which will be used to accelerate protons and antiprotons from 8.9 GeV/c to 150 GeV/c. The natural chromaticities of the machine for the horizontal and the vertical Planes are -33.6 and -33.9 respectively. The Δp/p of the beam at injection is about 0.002. The chromaticity requirements of the FMI, are primarily decided by the Δp/p = 0.002 of the beam at injection. This limits the final chromaticity of the FMI to be ±5 units. To correct the chromaticity in the FMI two families of sextupole magnets will be installed in the lattice, one for each plane. A sextupole magnet suitable for the FMI needs has been designed and a number of them are being built. New chromaticity compensation schemes have been worked out in the light of recently proposed faster acceleration ramps. On an R/D sextupole magnet the low current measurements have been carried out to determine the electrical properties. Also, using a Morgan coil, measurements have been performed to determine the higher ordered multipole components up to 18-poles. An overview of these result are presented here