Published June 6, 1980
| Version v1
Report
Modular drag disc turbine qualification tests
Description
Qualification Tests were performed on three modular drag-disc turbines (MDTT) at ARA III under the direction of C.E. Winsel. The tests were performed on MDTTs that had been rejected by the Quality Division (Quality Division Reports were issued) due to the sensitivity range and accepted as is by the Project Engineer. These tests consisted of full flow calibration and vibration tests. The results of these tests indicate the MDTT will survive 7.5g peak loading below 1400 Hz and should not be subjected to g loading for extended periods of time between 1400 and 1450 Hz
Availability note (English)
MF available from INIS under the Report Number; Available from NTIS., PC A02/MF A01.Additional details
Publishing Information
- Imprint Pagination
- 12 p.
- Report number
- EGG/LTR--141-109
INIS
- Country of Publication
- United States
- Country of Input or Organization
- United States
- INIS RN
- 11566072
- Subject category
- S21: SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS;
- Descriptors DEI
- FLOWMETERS; LOFT REACTOR; MECHANICAL VIBRATIONS; PERFORMANCE TESTING; STRESS ANALYSIS; STRESSES
- Descriptors DEC
- MEASURING INSTRUMENTS; PWR TYPE REACTORS; REACTORS; RESEARCH AND TEST REACTORS; TANK TYPE REACTORS; TEST REACTORS; TESTING; WATER COOLED REACTORS; WATER MODERATED REACTORS