Uranium Association with Corroding Carbon Steel Surfaces

The association of uranium with clean and corroded surfaces of 1010 carbon steel was investigated. Studying steel contaminated by uranium species will have an important effect on the development of methods used to clean radioactively contaminated metal waste. X-ray photoelectron spectroscopy, synchrotron infrared microspectroscopy and laboratory-based Fourier transform infrared analysis of steel surfaces exposed to uranyl nitrate showed the presence of crystallized hydrated uranyl oxides, uranyl hydroxides, iron oxyhydroxides and iron oxides. In general, heavily corroded areas physically shield the uranium species, which tended to associate spatially with hydroxyl groups and lepidocrocite. Lightly corroded areas contained uranium species with stronger axial U-O bonding. Infrared spectroscopy, Rutherford backscattering spectroscopy and energy-dispersive spectroscopy mapping analysis revealed that the uranium species are well distributed within the upper micron of the thick corrosion layer and associated more with areas of high hydroxide content. Parameters such as the concentration of uranyl nitrate solution used to expose the carbon steel coupons, the method of contamination (dipped or sprayed with dilute uranyl nitrate solution) and the degree of corrosion (accelerated corrosion before and/or after contamination) played significant roles in the distribution and nature of the uranyl hydroxide/iron oxyhydroxide corrosion products found on the surface of all coupons. These factors must be considered in the development and optimization of decontamination processes for metal waste