Transmission electron microscopy investigation of Ag diffusion mechanisms in β-SiC

Highlights: • Ag ions were implanted in β-SiC for diffusion and release studies. • HRTEM, focal series, and STEM/EDS reveal Ag agglomeration and transport. • Results suggest that a void mediated mechanism may play a role in Ag diffusion. - Abstract: β-Silicon carbide (β-SiC) acts as the main layer for metallic fission product retention in tristructural-isotropic (TRISO) fuel particles. It is critical to track these fission products in the β-SiC layer to provide a baseline understanding of safe fuel operation for next generation nuclear reactors. In this study, the microstructural evolution of the β-SiC layer is examined through the comparison of as-implanted and annealed samples up to 1600 °C using high resolution transmission electron microscopy (HRTEM). Faceted voids were observed in annealed samples but not in the as-implanted samples, suggesting the possibility that a void mediated fission product transport mechanism due to the change in microstructure of the β-SiC layer at elevated temperatures plays a role in the diffusion of metallic species through the β-SiC cladding layer. It should be noted, however, that Ag implantation at room temperature is not an ideal method to study Ag diffusion in TRISO fuel particles. Ultimately, Ag implantation should be performed above the critical temperature for which amorphization will not occur to better correlate to conditions in a Generation IV reactor and to see if void formation occurs