Published January 1999 | Version v1
Journal article

Behaviour of fission gas in the rim region of high burn-up UO2 fuel pellets with particular reference to results from an XRF investigation

  • 1. Risoe National Lab., Roskilde (Denmark). Materials Dept.
  • 2. AEA Technology, Fuel Performance, Windscale, Seascale, Cumbria CA20 1PF (United Kingdom)
  • 3. European Commission, Joint Research Centre, Institute for Transuranium Elements, P.O. Box 2340, 76125 Karlsruhe (Germany)

Description

XRF and EPMA results for retained xenon from Battelle's high burn-up effects program are re-evaluated. The data reviewed are from commercial low enriched BWR fuel with burn-ups of 44.8-54.9 GWd/tU and high enriched PWR fuel with burn-ups from 62.5 to 83.1 GWd/tU. It is found that the high burn-up structure penetrated much deeper than initially reported. The local burn-up threshold for the formation of the high burn-up structure in those fuels with grain sizes in the normal range lay between 60 and 75 GWd/tU. The high burn-up structure was not detected by EPMA in a fuel that had a grain size of 78 μm although the local burn-up at the pellet rim had exceeded 80 GWd/tU. It is concluded that fission gas had been released from the high burn-up structure in three PWR fuel sections with burn-ups of 70.4, 72.2 and 83.1 GWd/tU. In the rim region of the last two sections at the locations where XRF indicated gas release the local burn-up was higher than 75 GWd/tU. (orig.)

Additional details

Publishing Information

Journal Title
Journal of Nuclear Materials
Journal Volume
264
Journal Issue
1-2
Journal Page Range
p. 99-112
ISSN
0022-3115
CODEN
JNUMAM

Optional Information

Notes
19 refs.