The corrosion-electrochemical behaviour of titanium and aluminium in carbonate-fluoride melt
- 1. UrO RAN, Inst. Vysokotemperaturnoj Ehlektrokhimii, Ekaterinburg (Russian Federation)
Description
The results of interaction of titanium (the BT1 and OT4 alloys) and aluminium (A7) with carbonate-fluoride melts under the conditions of the metals free corrosion and polarization are presented. The tests were conducted in the CO2 + 0.5 O2 atmosphere up to 873 K. The metals corrosion potentials were measured relative to the comparison carbonate electrode. The titanium alloys under the free corrosion conditions were studied in the Li2CO3-Na2CO3-LiF (30.5-36.9-32.6 mol. %) eutectics at 800, 823 and 873 K. The corrosion tests showed that during 2-4 hours of the samples aging in the melt the corrosion loses increase by 3-5 times with temperature growth from 823 up 873 K. The corrosion potentials on the titanium alloys are established during 30-40 min; their values are by 0.5-0.6 V more negative as in the carbonate melt. It is shown that the fluoride additions to the melt do not destroy the oxide film formed in the carbonates on titanium and do not affect the cathode process, however, the surface modification due to oxofluorides formation is possible under the conditions of the anode polarization
Abstract (Russian)
Представлены результаты взаимодействия титана (сплавы ВТ1 и ОТ4) и алюминия (А7) с карбонатно-фторидными расплавами в условиях свободной коррозии и поляризации металлов. Испытания проводили в атмосфере CO2 + 0.5 O2. Потенциалы коррозии металлов измеряли относительно карбонатного электрода сравнения. Сплавы титана в условиях своюодной коррозии исследовали в эвтектике Li2CO3-Na2CO3-LiF (30.5-36.9-32.6 мол. %) при 800, 823 и 873 K. Коррозионные испытания показали, что за 2-4 ч выдержки образцов в расплаве коррозионные потери увеличиваются в 3-5 раз с ростом температуры от 823 до 873 К. Потенциалы коррозии на титановых сплавах устанавливаются в течение 30-40 мин, их значения на 0.5-0.6 В отрицательнее, чем в карбонатном расплаве. Показано, что добавки фторидов в расплав не разрушают сформированную в карбонатах оксидную пленку на титане и не влияют на катодный процесс, но в условиях анодной поляризации возможно модифицирование поверхности вследствие образования оксофторидовAdditional details
Additional titles
- Original title (Russian)
- Коррозионно-электрохимическое поведение титана и алюминия в карбонатно-фторидном расплаве
Publishing Information
- Journal Title
- Rasplavy
- Journal Issue
- no.4
- Journal Page Range
- p. 75-79
- ISSN
- 0235-0106
- CODEN
- RASPEM
INIS
- Country of Publication
- Russian Federation
- Country of Input or Organization
- Russian Federation
- INIS RN
- 32017730
- Subject category
- S36: MATERIALS SCIENCE;
- Descriptors DEI
- ALUMINIUM; CHEMICAL REACTION KINETICS; CORROSION RESISTANCE; ELECTRIC POTENTIAL; ELECTROCHEMICAL CORROSION; LITHIUM CARBONATES; LITHIUM FLUORIDES; MOLTEN SALTS; PASSIVATION; POTENTIOMETRY; SODIUM CARBONATES; TEMPERATURE DEPENDENCE; TEMPERATURE RANGE 0400-1000 K; TIME DEPENDENCE; TITANIUM BASE ALLOYS
- Descriptors DEC
- ALKALI METAL COMPOUNDS; ALLOYS; CARBON COMPOUNDS; CARBONATES; CHEMICAL ANALYSIS; CHEMICAL REACTIONS; CORROSION; ELEMENTS; FLUORIDES; FLUORINE COMPOUNDS; HALIDES; HALOGEN COMPOUNDS; KINETICS; LITHIUM COMPOUNDS; LITHIUM HALIDES; METALS; OXYGEN COMPOUNDS; QUANTITATIVE CHEMICAL ANALYSIS; REACTION KINETICS; SALTS; SODIUM COMPOUNDS; TEMPERATURE RANGE; TITANIUM ALLOYS; TITRATION; TRANSITION ELEMENT ALLOYS; VOLUMETRIC ANALYSIS
Optional Information
- Notes
- 7 refs., 3 figs., 1 tab.