Zircaloy Cladding as Starting Precursor for Ceramic Waste-Forms - 15562

Zircaloy cladding of spent fuel is regular waste-stream related to the process of reprocessing. It remains in the apparatus after spent fuel dissolution. The most common technique of zircaloy cladding treatment is cementation and disposal in metallic containers. In view of the high cost of the cladding material (mainly zirconium), there have been a number of proposals for this material to be recovered and re-used. However, the residual contamination of the claddings following the dissolution of the fuel and the chemical stability of the zirconium militate against any proposal for a recycling process that might be economically reasonable. At the same time there is a lot of information available about synthesis of mineral-like materials based on zirconium for immobilization of long-lived radionuclides. The object of this work was to study experimentally electrochemical dissolution of fuel rod cladding for further obtaining starting precursor for the synthesis of ceramic-waste forms. The results of experiments on electrochemical dissolution of zirconium and zirconium alloy (fuel rod cladding) in nitric acid solutions are presented. The peak dissolution rate of specimens is shown to be observed in dilute nitric acid at elevated temperatures. The rate of dissolution rises with temperature, reaching ∼40-70 mg/cm².h at 90 deg. C. The current yield at this point is 0.6-0.7 g/A.h. The results of analysis of the surface oxide film on specimens and residues formed during dissolution are also presented. An electrochemical dissolution of zircaloy claddings is the common technique for preparation of zirconium solutions to be used for ceramic waste form synthesis. (authors)