Published February 1, 2018 | Version v1
Journal article

Comparative analysis of the Performance and Emission Characteristics of ethanol-butanol-gasoline blends

  • 1. Research Scholar, Mechanical Engineering, PEC University of Technology, Chandigarh, 160012 (India)
  • 2. Professor, Mechanical Engineering, PEC University of Technology, Chandigarh, 160012 (India)

Description

Global warming and energy security being the global problems have shifted the focus of researchers on the renewable sources of energy which could replace petroleum products partially or as a whole. Ethanol and butanol are renewable sources of energy which can be produced through fermentation of biomass. A lot of research has already been done to develop suitable ethanol-gasoline blends. In contrast very little literature available on the butanol-gasoline blends. This research focuses on the comparison of ethanol-gasoline fuels with butanol-gasoline fuels with regard to the emission and performance in an SI engine. Experiments were conducted on a variable compression ratio SI engine at 1600 rpm and compression ratio 8. The experiments involved the measurement of carbon monoxide, carbon dioxide, oxides of nitrogen and unburned hydrocarbons emission and among performance parameters brake specific fuel consumption and brake thermal efficiency were recorded at three loads of 2.5kgs (25%), 5kgs (50%) and 7.5kgs (75%). Results show that ethanol and butanol content in gasoline have decreased brake specific fuel consumption, carbon monoxide and unburned hydrocarbon emissions while the brake thermal efficiency and oxides of nitrogen are increased. Results indicate thatbutanol-gasoline blends have improved brake specific fuel consumption, carbon monoxide emissions in an SI engine as compared to ethanol-gasoline blends. The carbon dioxide emissions and brake thermal efficiencies are comparable for ethanol-gasoline blends and butanol-gasoline blends. The butanol content has a more adverse effect on emissions of oxides of nitrogen than ethanol. (paper)

Availability note (English)

Available from http://dx.doi.org/10.1088/1757-899X/310/1/012136

Additional details

Publishing Information

Journal Title
IOP Conference Series. Materials Science and Engineering (Online)
Journal Volume
310
Journal Issue
1
Journal Page Range
[9 p.]
ISSN
1757-899X

Conference

Title
International Conference on Advances in Materials and Manufacturing Applications
Acronym
IConAMMA-2017
Dates
17-19 Aug 2017
Place
Bengaluru (India)